Name: Wallbox Halterung Doppelstabmattenzaun
Rating: 5.00 (1 reviews)

Double-Wire Mesh Wallbox Fence Mount

Wallbox Mount for Double-Wire Mesh Fences 6/5/6 mm and 8/6/8 mm

£212.00

Color: Glossy Anthracite Grey (RAL 7016)

Glossy Anthracite Grey (RAL 7016)
Glossy Moss Green (RAL 6005)

Pole Type: Bended

Bended
Front Straight
Back Straight

Productvarianten

Hoeveelheid

Beliebtes Zubehör

Low-Voltage Cast Resin Cable Joint for Underground Use

Qty

£19.00

In stock: Delivery time: approx. 5–9 business days

Note: The wallbox is not included in the scope of delivery and is shown in the product images for illustration purposes only.

With this mount, you can attach your wallbox to standard double-wire mesh fences with wire thicknesses of 6/5/6 mm or 8/6/8 mm. Especially when no wall is available, this solution is more elegant because no freestanding post is required. Thanks to the integrated roof of the back plate, the wallbox is protected from rain. At the same time, the charging cable can be wrapped around the wallbox.
The post can be cut to the correct length at the bottom. The minimum fence height is 60 cm.

✔ Weatherproof and durable
The mount is made from weather-resistant materials such as aluminum, stainless steel, and UV-resistant plastics.

✔ Easy installation
All materials required for installation are included in the scope of delivery. Assembly can be done by one person.

More details about the product can be found below in the product details.

Product Details

Scope of Delivery

Installation instructions
Back plate for wallbox
Post (straight or angled)
Post cap (top)
Edge protector (bottom)
Cable grommets / cable entries
- Supply cable: 13 mm to 21 mm outer diameter
- Data cable: 9 mm to 17 mm outer diameter
Double-wire mesh fence bracket
Required screws
M8 grounding set

Technical Data

Post length: 1170mm (always delivered at full length. The post can be cut at the bottom by the buyer.)
Post cross-section: 60 x 40 mm
Color: RAL 7016 (anthracite grey) or RAL 6005 (moss green)
Weather-resistant and durable materials: (aluminum, stainless steel, and other UV-resistant materials)

Compatibility

Double-wire mesh fences: 8/6/8 mm and 6/5/6 mm
Possible fence heights: 60 cm – 200 cm
Wallbox Models:
– Go-e Gemini
– Go-e Gemini 2.0
– Fronius Wattpilot Go 2.0
– Easee Charge Up
– Easee Charge Core
– Easee Home
– SMA eCharger 22
– KEBA P30
– Heidelberg Wallbox Home Eco
– Elli Charger 2 (Audi, Skoda, Volkswagen, Seat Cupra)
– Tesla Gen 3 Wall Connector
– Huawei SCharger-7KS/22KT-S0
– Zaptec Go 2
– GoodWe HCA G2
– Growatt THOR 11AS-S/P-V1
– Growatt THOR 22AS-S/P-V1

Installation Notes

Electrical connection must only be made by a registered electrician
You can easily install the mounting bracket yourself
Required cables for the wall box
– Supply cable: (required cross-section must be determined by a qualified electrician)
– Optional control cable (for reducing the wall box output to 4.2 kW in accordance with §14a EnWG)
– Optional network cable (for data transmission)

More Wallbox Models & Feedback

If your wallbox model is not currently available or you have suggestions for improvements, feel free to send us an email. We can add your wallbox model to our product range or make adjustments to the product. Please contact us via our Contact Page.